Bits End Mill Dilapisi Untuk Pengolahan Titanium Baja Tekan Bor
Kontak Person : KING
Nomor telepon : 86-18115005888
Ada apa : +8618115005888
| Kuantitas min Order : | 1pc | Harga : | Negotiation |
|---|---|---|---|
| Kemasan rincian : | 1 PC / PVC Packing, 10 pcs PVC Packing / Pack ... | Waktu pengiriman : | 1-35 hari |
| Syarat-syarat pembayaran : | T / T, L / C, Paypal ... | Menyediakan kemampuan : | 10000pcs/minggu |
| Tempat asal: | BUATAN CHINA | Nama merek: | KTC |
|---|---|---|---|
| Sertifikasi: | CCC | Nomor model: | Pemotong Thread Mill |
|
Informasi Detail |
|||
| Nama Produk: | Akhir Mills | Bahan baku: | GU25UF |
|---|---|---|---|
| Seruling no.: | 3/4 Seruling | Kekerasan: | > 92HRA |
| Bahan: | Karbit | Presisi: | Presisi Tinggi |
| Cahaya Tinggi: | pabrik benang ulir,pabrik akhir mesin penggilingan |
||
Deskripsi Produk
Pemotong Pabrik Benang Flute Multi / Pemotong Akhir Pabrik Penggilingan Karbida Padat
Pemotong Pabrik Thread KTC
Spesifikasi
| Bahan baku | GU25UF |
| toilet | 88% |
| Bersama | 12% |
| TRS | > 4300N / mm2 |
| Kekerasan | > 92HRA |
| AOL | 50mm-90mm |
| Ukuran butir | 0,4 μm |
| Sampai | HRC60 |
| Seruling No | 3 / 4F |
| Cocok untuk | Aluminium, plastik, dan bahan lainnya |
Ukuran Standar
| Pemotong Thread Pabrik UN 60 ° untuk Aluminium | |||||||||
| Pitch (TPI) | UNC | UNF | UNEF | Shank Dia. | Edge Dia. | Jumlah Seruling | Panjang Suling | Panjang keseluruhan | Lubang Bawah Dia. |
| 36 | No.8-36 | 4 | 3 | 3 | 8.5 | 50 | 3.5 | ||
| 32 | No.10-32 | No.12-3 / 8-32 | 4 | 3.5 | 3 | 11.1 | 50 | 4 | |
| 28 | No.12-28,1 / 4-28 | 7 / 16,1 / 2-28 | 4 | 4 | 3 | 11.8 | 50 | 4.6 | |
| 28 | 1 / 4-28 | 7 / 16,1 / 2-28 | 6 | 5 | 3 | 12.7 | 57 | 5.5 | |
| 28 | 7 / 16,1 / 2-28 | 10 | 9.2 | 4 | 22.7 | 75 | 10.2 | ||
| 24 | No.10-24 | 5 / 16,3 / 8-24 | 9 / 16,11 / 16-24 | 4 | 3.2 | 3 | 10.6 | 50 | 3.8 |
| 24 | No.12-24 | 5 / 16,3 / 8-24 | 9 / 16,11 / 16-24 | 4 | 4 | 3 | 11.6 | 50 | 4.5 |
| 24 | 5 / 16,3 / 8-24 | 9 / 16,11 / 16-24 | 6 | 6 | 3 | 15.9 | 57 | 6.8 | |
| 24 | 3 / 8-24 | 9 / 16,11 / 16-24 | 8 | 7.8 | 3 | 19.1 | 60 | 8.5 | |
| 24 | 9 / 16,11 / 16-24 | 12 | 11.9 | 4 | 28.6 | 75 | 13.2 | ||
| 20 | 1 / 4-20 | 7 / 16,1 / 2-20 | 3 / 4,1-20 | 4 | 4 | 3 | 12.7 | 50 | 5.2 |
| 20 | 7 / 16,1 / 2-20 | 3 / 4,1-20 | 10 | 9 | 4 | 22.9 | 75 | 9.8 | |
| 20 | 1 / 2-20 | 3 / 4,1-20 | 10 | 10 | 4 | 25.4 | 75 | 11.5 | |
| 20 | 3 / 4,1-20 | 12 | 12 | 4 | 38.1 | 75 | 17.8 | ||
| 18 | 5 / 16-18 | 9/16 | 11 / 16,1-11 / 16-18 | 6 | 5.8 | 3 | 16.9 | 57 | 6.5 |
| 18 | 9 / 16,5 / 8-18 | 11 / 16,1-11 / 16-18 | 10 | 10 | 4 | 29.6 | 75 | 12.8 | |
| 16 | 3 / 8-16 | 3 / 4-16 | 8 | 7.6 | 3 | 19.1 | 60 | 8 | |
| 16 | 3 / 4-16 | 12 | 12 | 4 | 28 | 75 | 17.5 | ||
| 14 | 7 / 16-14 | 7 / 8-14 | 8 | 8 | 3 | 20 | 60 | 9.3 | |
| 14 | 7 / 8-14 | 16 | 16 | 4 | 39.9 | 90 | 20.5 | ||
| 13 | 1 / 2-13 | 8 | 8 | 3 | 20 | 60 | 10.8 | ||
| 12 | 9 / 16-12 | 1 "1-1 / 2-12 | 10 | 10 | 4 | 28 | 75 | 12.3 | |
| 12 | 1 "1-1 / 2-12 | 16 | 16 | 4 | 40 | 90 | 23.5 | ||
| 11 | 5 / 8-11 | 12 | 12 | 4 | 30 | 75 | 13.5 | ||
| 10 | 3 / 4-10 | 12 | 12 | 4 | 30 | 75 | 16.5 | ||
| 9 | 7 / 8-9 | 16 | 16 | 4 | 38 | 90 | 19.5 | ||
| 8 | 1-8 | 16 | 16 | 4 | 40 | 90 | 22 | ||
| UN 60 ° Outer Thread Mill Cutter untuk Aluminium | |||||||
| Pitch (TPI) | UNC | UNF | Shank Dia. | Edge Dia. | Jumlah Seruling | Panjang Suling | Panjang keseluruhan |
| 32 | No.8-32 | 6 | 6 | 3 | 11.91 | 50 | |
| 28 | 12-28 | 6 | 6 | 3 | 12.7 | 50 | |
| 24 | No.12-24 | 6 | 6 | 3 | 12.7 | 50 | |
| 20 | 1 / 4-20 | 6 | 6 | 3 | 15.4 | 50 | |
| 18 | 5 / 16-18 | 8 | 8 | 3 | 16.93 | 60 | |
| 16 | 3 / 8-16 | 8 | 8 | 3 | 19.05 | 60 | |
| 12 | 9 / 16-12 | 12 | 12 | 4 | 29.6 | 75 | |
| M ISO Standar 60 ° Pemotong Ulir Dalam untuk Baja | ||||||||
| Pitch (mm) | M Thread Kasar | M Benang Halus | Shank Dia. | Edge Dia. | Jumlah Seruling | Panjang Suling | Panjang keseluruhan | Lubang Bawah Dia. |
| 0,5 | M3 * 0,5 | 4 | 2.3 | 3 | 6 | 50 | 2.5 | |
| 0,5 | M6 * 0,5 | 4 | 4 | 3 | 10 | 50 | 5.5 | |
| 0,5 | M8-M12 * 0,5 | 6 | 6 | 3 | 13 | 50 | 7.5 | |
| 0,6 | M3.5 * 0.6 | 4 | 2.7 | 3 | 7 | 50 | 2.9 | |
| 0,7 | M4 * 0.7 | 4 | 3 | 3 | 8 | 50 | 3.3 | |
| 0,75 | M4.5 * 0.75 | 4 | 3.4 | 3 | 9 | 50 | 3,75 | |
| 0,75 | M10-M12 * 0,75 | 8 | 8 | 3 | 20 | 50 | 9.25 | |
| 0.8 | M5 * 0.8 | 4 | 4 | 3 | 10 | 50 | 4.2 | |
| 1 | M6 * 1.0 | 6 | 4.8 | 3 | 12 | 57 | 5.0 | |
| 1 | M8 * 1.0 | 6 | 6 | 3 | 16 | 57 | 7.0 | |
| 1 | M10 * 1.0 | 8 | 8 | 3 | 20 | 60 | 9.0 | |
| 1 | M12 * 1.0 | 10 | 10 | 4 | 22 | 75 | 11.0 | |
| 1 | M16 * 1.0 | 12 | 12 | 4 | 22 | 75 | 15.0 | |
| 1 | M20-M48 * 1.0 | 16 | 16 | 4 | 30 | 90 | 19.0 | |
| 1.25 | M8 * 1.25 | 6 | 6 | 3 | 16 | 57 | 6.75 | |
| 1.25 | M12-M14 * 1.25 | 10 | 10 | 4 | 25 | 75 | 10.75 | |
| 1.5 | M10 * 1.5 | 8 | 8 | 3 | 20 | 60 | 8.5 | |
| 1.5 | M12-M20 * 1.5 | 10 | 10 | 4 | 28 | 75 | 10.5 | |
| 1.5 | M14-M24 * 1.5 | 12 | 12 | 4 | 28 | 75 | 12.5 | |
| 1.5 | M20-M48 * 1.5 | 16 | 16 | 4 | 30 | 90 | 18.5 | |
| 1.75 | M12 * 1.75 | 10 | 9.8 | 4 | 30 | 75 | 10.25 | |
| 2 | M14 * 2.0 | M15-M16 * 2.0 | 10 | 10 | 4 | 30 | 75 | 12.0 |
| 2 | M16 * 2.0 | M17-M20 * 2.0 | 12 | 12 | 4 | 30 | 75 | 14.0 |
| 2 | M20-M80 * 2.0 | 16 | 16 | 4 | 40 | 90 | 18.0 | |
| 2.5 | M18-M20 * 2.5 | 14 | 14 | 4 | 36 | 85 | 15.5 | |
| 2.5 | M20-M80 * 2.5 | 16 | 16 | 4 | 40 | 90 | 17.5 | |
| 3 | M24 * 3.0 | 16 | 16 | 4 | 42 | 90 | 21.0 | |
| 0,75 | M6 * 0,75 | 6 | 4.8 | 3 | 12 | 60 | 5.25 | |
| 0,75 | M8 * 0,75 | 6 | 6 | 3 | 16 | 60 | 7.25 | |
| 1.25 | M10 * 1.25 | 8 | 8 | 3 | 20 | 60 | 8.75 | |
| M ISO Standar 60 ° Outer Thread Mill Cutter untuk Baja | ||||||
| Pitch (mm) | M Thread Kasar | Shank Dia. | Edge Dia. | Jumlah Seruling | Panjang Suling | Panjang keseluruhan |
| 0,5 | M3 * 0,5 | 4 | 4 | 3 | 6 | 50 |
| 0,7 | M4 * 0.7 | 4 | 4 | 3 | 8 | 50 |
| 0,75 | M4.5 * 0.75 | 4 | 4 | 3 | 9 | 50 |
| 0.8 | M5 * 0.8 | 4 | 4 | 3 | 10 | 50 |
| 1 | M6 * 1.0 | 6 | 6 | 3 | 13 | 57 |
| 1.25 | M8 * 1.25 | 6 | 6 | 3 | 16 | 57 |
| 1.5 | M10 * 1.5 | 8 | 8 | 3 | 20 | 60 |
| 1.75 | M12 * 1.75 | 10 | 10 | 4 | 28 | 75 |
| 2 | M14 * 2.0 | 10 | 10 | 4 | 30 | 75 |
| 2.5 | M18 * 2.5 | 14 | 14 | 4 | 36 | 85 |
| 3 | M24 * 3.0 | 16 | 16 | 4 | 40 | 90 |
Faq
T: Apakah Anda perusahaan dagang atau pabrikan?
A: kami adalah produsen Mengkhususkan diri dalam High-End alat pemotong karbida dan alat pemotong non-standar, OEM & ODM menerima;
Q: Berapa lama waktu pengiriman Anda?
A: Umumnya 1-35 hari kerja, itu tergantung;
Q: Apakah Anda menyediakan sampel? apakah gratis atau ekstra?
A: Ya, kami dapat menawarkan sampel stok kami untuk biaya gratis dan Anda silakan membayar biaya pengiriman.
alat pemotong kustom dinegosiasikan maka kami akan mengutip biaya sampel terbaik.
Jika Anda memiliki pertanyaan lain, silakan hubungi kami.
Masukkan Pesan Anda
| Changzhou Xinpeng Tools Manufacturing Co.,Ltd |
| Zona Industri Xixiashu, Distrik Xinbei, Kota Changzhou, Provinsi Jiangsu, Cina |
| 86-519-83431198 |
| czxptools@163.com |